Quadrupole ion trap Totally Explained

Everything about Quadrupole Ion Trap totally explained

A quadrupole ion trap exists in both linear and 3D (Paul Trap, QIT) varieties and refers to an ion trap that uses constant DC and radio frequency (RF) oscillating AC electric fields to trap ions. It is a component of a mass spectrometer that would use such a trap to analyze ions. The invention of the 3D quadrupole ion trap itself is attributed to Wolfgang Paul who shared the Nobel Prize in Physics in 1989 for this work.

Theory

The 3D trap itself generally consists of two hyperbolic metal electrodes with their foci facing each other and a hyperbolic ring electrode halfway between the other two electrodes. The ions are trapped in the space between these three electrodes by AC (oscillating, non-static) and DC (non-oscillating, static) electric fields. The AC radio frequency voltage oscillates between the two hyperbolic metal end cap electrodes if ion excitation is desired; the driving AC voltage is applied to the ring electrode. The ions are first pulled up and down axially while being pushed in radially. The ions are then pulled out radially and pushed in axially (from the top and bottom). In this way the ions move in a complex motion that generally involves the cloud of ions being long and narrow and then short and wide, back and forth, oscillating between the two states. Since the mid-1980's most 3D traps (Paul traps) have used ~1 mtorr of helium. The use of damping gas and the mass-selective instability mode developed by Stafford et al. led to the first commercial 3D ion traps. The quadrupole ion trap has two configurations: the three dimensional form described above and the linear form made of 4 parallel electrodes. The advantage of this design is in its simplicity, but this leaves a particular constraint on its modeling. To understand how this originates, it's helpful to visualize the linear form. The Paul trap is designed to create a saddle-shaped field to trap a charged ion, but with a quadrupole, this saddle-shaped electric field can't be rotated about an ion in the centre. It can only 'flap' the field up and down. For this reason, the motions of a single ion in the trap are described by the Mathieu Equations. These equations can only be solved numerically, or equivalently by computer simulations.
The intuitive explanation and lowest order approximation is the same as strong focusing in accelerator physics. Since the field affects the acceleration, the position lags behind (to lowest order by half a period). So the particles are at defocused positions when the field is focusing and visa versa. Being farther from center, they experience a stronger field when the field is focusing than when it's defocusing.

Equations of motion

Ions in a quadrupole field experiences restoring forces that drive them back toward the center of the trap. The motion of the ions in the field is described by solutions to the Mathieu equation. When written for ion motion in a trap, the equation is ť

frac . qquadqquad (13) !

The trapping of ions can be understood in terms of stability regions in

q_u

and

a_u

space.

Linear ion trap

Linear ion trap use a set of quadrupole rods to confine ions radially and a static electrical potential on end electrodes to confine the ions axially. The linear form of the trap can be used as a selective mass filter, or as an actual trap by creating a potential well for the ions along the axis of the electrodes. Advantages of the linear trap design are increased ion storage capacity, faster scan times, and simplicity of construction (although quadrupole rod alignment is critical, adding a quality control constraint to their production. This constraint is additionally present in the machining requirements of the 3D trap).
Thermo Fisher's LTQ is an example of the Linear ion trap. LTQ stands for Linear Trap Quadrupole, and not Linear Triple Quadruple as some might think (Ref. call to ThermoFisher's World Headquarters by JP)

Cylindrical ion trap

Cylindrical ion traps have a cylindrical rather than a hyperbolic ring electrode. This configuration has been used in miniature arrays of traps.

Further Information

Get more info on 'Quadrupole Ion Trap'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://quadrupole_ion_trap.totallyexplained.com">Quadrupole ion trap Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.